These instructions are for Windows XP. No “Software Activation” required! Acts as a “dongle”. It should be fixed now. Find the folder and if it isn’t auto-selected for you, pick the ftdibus. Basically need to launch VCDS software via extra file:

Uploader: Vular
Date Added: 27 December 2017
File Size: 19.8 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 2836
Price: Free* [*Free Regsitration Required]

Ross-Tech: VCDS: USB Driver Installation for Windows XP

If you get a Windows message stating “This hardware will not be installed. Click on the Advanced tab which is new. It does not emulate a COM port. Open up Ross tech usb interface Manager, either by itself or through the computer management console. The following dialog should appear: In that case, you want to click Have Disk We only intercace them with our VCDS software.

Install & Setup Ross-Tech VCP Drivers – imnuts

And disable driver signature enforcement. Click the [ Finish] button to complete the installation. Odds are, if you’re reading this, you haven’t installed the VCP driver before. Early in their development, we found a number of technical advantages to using a “direct” USB driver which bypasses the Windows Serial drivers entirely. However, anyone thinking about using them needs to be aware ross tech usb interface the following points: This will open the driver properties, and if you’ve been here before, you’ll notice ross tech usb interface new tab.

Related Drivers  NVIDIA 94.24 DRIVERS DOWNLOAD

Go to Step 3. Depending on what drivers your system already has installed, you may have to “force” these by telling the wizard not to search, ross tech usb interface to let you specify what driver to install, then doing udb Have Disk and Browse thing. When driver installation is complete, disconnect cable from computer.

Right click on one, or the only one, and select properties. You want to right click on it again, as you did to update the driver, but this time select Properties.

Allow the software you just downloaded to install itself on your PC. It will have a yellow mark next inetrface it like this: Once checked, disconnect and re-connect the interface.

If you choose to install it someplace other than the default location, make a note of folder you’re installing it to. Select ” Search for the best driver in these locations ” Check ” Include this location in the search: Make sure to tick Ross tech usb interface “Install bit”. This is ross tech usb interface to interrace that you are at least somewhat familiar with navigating around Windows.


First, download the drivers from Ross-Tech. Click here for complete driver installation instructions. Click the [ Options ] button. In this case, disconnect cable. This interface works with most diagnostic-capable VW, Audi, Seat, and Skoda models from through but does not work with any model requiring a direct CAN connection for diagnostics.

This also shouldn’t have ross tech usb interface effect on the usage of VCDS, as it should work as normal. This is being displayed on Windows interfaace, but the process should be similar, if not identical, on Windows Vista, Windows 7, and Windows 8.

At the window that pops up, this is where you want to browse for the driver that you downloaded previously.

OBD-II connector made to our own specifications. However, product support is provided only to the original purchaser.